How to Measure:

Width:

Measure your aperture width in 3 separate places and then deduct 10mm  off your smallest size. This will be your order size.

Height:

Measure your aperture width in 3 separate places and then deduct 10mm  off your smallest size. This will be your order size.

If you select a cill it will be included in your order Height.

The minimum width is   1200mm
The maximum width is   2750mm

The minimum height is   600mm.
The maximum height is  1750mm

Please ensure you select the correct size range for your width entered.
 

For that special project we offer  a choice of 210 Classic RAL colours and countless BS colours. Below are a few popular choices and are a close representation of colour. For an exact verification of colour, please purchase a RAL Colour Chart.When ordering select RAL Colour and confirm by a separate e-mail your colour choice.

External Cills:

The industry standard is 150mm. A stub cill may be required if you have a small reveal or are sitting your window frame forward in the reveal and want to minimize the projection of the cill.You may choose an 180mm cill if the door is sitting back in the reveal and you need to bridge the brickwork at the base of the frame.

Stub Cill:

150mm Cill:

180mm Cill:

Glass Specification:
The glass in our windows is 28mm  toughened, argon filled , conforming  to building regulations. This is as standard a high specification. However you can configure the choice of Low ‘E’ coating (2), Spacer Bar (3) and internal glass type (4).  The lower the ‘U’ Value the higher the specification combined with  lower energy costs and comfort.

   Leaded Glass:

• Square Leaded Glass

  Lead is 12mm wide.
• Choice of Square or Diamond Leaded.
• When ordering square leaded please advise by e- mail your existing square size and preffered grid layout.
• When ordering Diamond Leaded please advise existing diamond size.
• CAD drawings are provided for square leaded glass only, to ensure our layout matches your current design.
• If not advised otherwise we will manufacture to our standard layout.

  Georgian Bar:

• Choice of 18mm or 25mm bar width.
• Available in White, Brown and Acorn colours.
• When ordering  please advise by e- mail your existing square size and preffered grid layout.
• Full CAD drawings are provided after an order has been placed, to ensure our layout matches your current design or preferred choice.
• If not advised otherwise we will manufacture to our standard layout.

• All our windows are made to such a high specification, they automatically conform to the current building (PART L) regulations. The only other consideration is if trickle ventilation is required.
• All habitable rooms require 5000mm sq of equivalent air
• If you have no other means of venting your room ( i.e a brick vent, mechanical ventilation or another door or window with a trickle vent fitted) then a trickle vent will need to be fitted to your window.
• Each trickle vent on a window provides 2500mm sq of equilvalent air. Therefore you must ensure that there are two trickle vents fitted to any product in a habitable room.
• If you are unsure please call o24 76 694 162.

  If your window is a replacement:

• If you are replacing an existing window and not changing the structural width of your opening then building regulations do not apply.
• If the window you are replacing has trickle ventilation already fitted, then it is a requirement that a trickle vent is fitted to the replacement window.
• You may choose to have a vent fitted regardless of if being a requirement, to aid background ventilation.
• If you are unsure please call 024 76 694 162.

Installation Service.

• Although our windows are extremely easy to fit we also offer a full installation service, for full peace of mind.
• The additional cost on a window is £70 including VAT, paid on completion. The product cost is paid with order.
• A full survey is included.
• The warranty is one year on labour, plus a standard 5 year parts warranty. 
• Due to the demand for this service, delivery and installation is 4-6 weeks from date of order.
• A Fensa certificate is issued on completion.

What we need from you.

• Before ordering a window with an installation service, you must first be advised that we will undertake your order, by a slideandfold.co.uk representative. You will be given a reference number to validate your order.
• You will need to e-mail sales@slideandfold.co.uk digital pictures of the front and side access of your property. Plus images of the outside and inside view of where your window(s) are to be installed.
• This service is designed for new build and not replacement of existing windows. However this may be undertaken subject to consulation with Slide and Fold.
• You will be bound by all terms and conditions found at www.shop.slideandfold.co.uk.